Types of Auto Color
Nitro-cellulose lacquer
Classic colors for public service vehicles from the nitro-cellulose lacquer. It is very popular among manufacturers and dealers because of its durability and low cost implementation requirement. Nitro-cellulose paint using a brush, although it showed that the use of aerosols, gives better results. After applying the paint, the paint dries by evaporation. With this type of paint will cost less, but requires more work and time. Surface glossy, after a series of intensive polishing.
Two-component paint or isocyanates
Two isocyanates or painting mostly in 1970. This durable type of car paint and, at least at the time of application. This type of weapon used color to make a simple and produces a one-way. A hardener is included in the next layer of paint to dry. Isocyanate paint is toxic and can lead to fatal respiratory damage. The application requires a high quality respirator filter components isocyanate.
Watercolor
Painting with water-based environment is a kind of painting. It is now generally supported by most businesses and garages. Two sets of paint-application is necessary to protect the paint on a water-based vehicles.
A mixture of water colors can be complicated and may require that the machine is an artist with extensive experience in the use and application.
Car Painting Tips
High-quality color machines are so good, how to implement and maintain them. Proper use of color, you can specify the maximum lifetime of your vehicle color.
1. Make sure that all necessary materials and equipment that you need to paint your car. Degreaser, tape gun, transparent layer of paint, and the first car wax, the usual materials necessary for painting a car.
2. Select region and paint the car. Closed areas may be to protect against rain and dust particles, the color of your progress.
3. Wash your car in front of a color to remove dust and particles that have an impact on your car recently.
4. To remove grease and wax the car is also used to remove dirt and stains in your car. Polish and smooth the surfaces with sandpaper.
5. Wash all traces of polishing and powder, and then the car.
6. Place masking tape on the areas that you do not want to change the color on the first machine from the outside. This handbook serves as a base layer of paint on the car.
7. Make sure that the unevenness in the application of primers and polish them. Once your car for free from bitterness, the first layer of the color of your car with a gun. Keep in mind that some computers require a DIY Autobild masked during the application.
8. The first layer is dry, the last layer. Remove dried paint on your gun nozzle exit to prevent damage to paint. Let the paint dry.
|
|
|
|
|
|
|
|
|
|
|
|
